Argon compounds

src: slideplayer.com

Argon compounds, the chemical compounds that contain the element argon, are rarely encountered due to the inertness of the argon atom. However, compounds of argon have been detected in inert gas matrix isolation, cold gases, and plasmas, and molecular ions containing argon have been made and also detected in space. One solid interstitial compound of argon, Ar₁C₆₀ is stable at room temperature. Ar₁C₆₀ was discovered by CSIRO.

Argon ionises at 15.76 eV, which is higher than hydrogen, but lower than helium, neon or fluorine. Molecules containing argon can be van der Waals molecules held together very weakly by London dispersion forces. Ionic molecules can be bound by charge induced dipole interactions. With gold atoms there can be some covalent interaction. Experimental methods used to study argon compounds have included inert gas matrices, infrared spectroscopy to study stretching and bending movements, microwave spectroscopy and far infrared to study rotation, and also visible and ultraviolet spectroscopy to study different electronic configurations including excimers. Mass spectroscopy is used to study ions. Computation methods have been used to theoretically compute molecule parameters, and predict new stable molecules. Computational ab initio methods used have included CCSD(T), MP2 (Møller-Plesset perturbation theory of the second order), CIS and CISD. For heavy atoms, effective core potentials are used to model the inner electrons, so that their contributions do not have to be individually computed. More powerful computers since the 1990s have made this kind of in silico study much more popular, being much less risky and simpler than an actual experiment. This article is mostly based on experimental or observational results.

The argon fluoride laser is important in photolithography of silicon chips. These lasers make a strong ultraviolet emission at 192 nm.

Video Argon compounds

Argonium

Argonium (ArH⁺) is an ion combining a proton and an argon atom. It is found in interstellar space in diffuse atomic hydrogen gas where the fraction of molecular hydrogen H₂ is in the range of 0.0001 to 0.001.

Argonium is formed when H₂⁺ reacts with Ar atoms:

Ar + H+
2 -> ArH⁺ + H

and it is also produced from Ar⁺ ions produced by cosmic rays and X-rays from neutral argon:

Ar⁺ + H₂ -> *ArH⁺ + H 1.49 eV.

When ArH⁺ encounters an electron, dissociative recombination can occur, but it is extremely slow for lower energy electrons, allowing ArH⁺ to survive for a much longer time than many other similar protonated cations.

ArH⁺ + e^- -> ArH* -> Ar + H

Artificial ArH⁺ made from earthly argon contains mostly the isotope ⁴⁰Ar rather than the cosmically abundant ³⁶Ar. Artificially it is made by an electric discharge through an argon-hydrogen mixture.

Natural occurrence

In the Crab Nebula, ArH⁺ occurs in several spots revealed by emission lines. The strongest place is in the Southern Filament. This is also the place with the strongest concentration of Ar⁺ and Ar²⁺ ions. The column density of ArH⁺ in the Crab Nebula is between 10¹² and 10¹³ atoms per square centimeter. Possibly the energy required to excite the ions so that then can emit, comes from collisions with electrons or hydrogen molecules. Towards the Milky Way centre the column density of ArH⁺ is around 2×10¹³ cm^-2.

Maps Argon compounds

Cluster argon cations

The diargon cation, Ar+
2 has a binding energy of 1.29 eV.

The triargon cation Ar+
3 is linear, but has one Ar-Ar bond shorter than the other. Bond lengths are 2.47 and 2.73 ångströms. The dissociation energy to Ar and Ar₂⁺ is 0.2 eV. In line with the molecule's asymmetry, the charge is calculated as +0.10, +0.58 and +0.32 on each argon atom, so that it greatly resembles Ar+
2 bound to a neutral Ar atom.

Larger charged argon clusters are also detectable in mass spectroscopy. The tetraargon cation is also linear. Ar+
13 icosahedral clusters have an Ar+
3 core, whereas Ar+
19 is dioctahedral with an Ar+
4 core. The linear Ar+
4 core has +0.1 charge on the outer atoms, and +0.4 charge on each or the inner atoms. For larger charged argon clusters, the charge is not distributed on more than four atoms. Instead the neutral outer atoms are attracted by induced electric polarization. The charged argon clusters absorb radiation, from the near infrared, through visible to ultraviolet. The charge core, Ar+
2, Ar+
3 or Ar+
4 is called a chromophore. Its spectrum is modified by the first shell of neutral atoms attached. Larger clusters have the same spectrum as the smaller ones. When photons are absorbed in the chromophore, it is initially electronically excited, but then energy is transferred to the whole cluster in the form of vibration. Excess energy is removed by outer atoms evaporating from the cluster one at a time. The process of destroying a cluster by light is called photofragmentation.

Negatively-charged argon clusters are thermodynamically unstable, and therefore cannot exist. Argon has a negative electron affinity.

src: dmd.aspetjournals.org

Argon monohydride

Neutral argon hydride, also known as argon monohydride (ArH), was the first discovered noble gas hydride. J. W. C. Johns discovered an emission line of ArH at 767 nm and announced the find in 1970. The molecule was synthesized using X-ray irradiation of mixtures of argon with hydrogen-rich molecules such as H₂, H₂O, CH₄ and CH₃OH. The X-ray excited argon atoms are in the 4p state.

Argon monohydride is unstable in its ground state, 4s, as a neutral inert gas atom and a hydrogen atom repel each other at normal intermolecular distances. When a higher-energy-level ArH* emits a photon and reaches the ground state, the atoms are too close to each other, and they repel and break up. However a van der Waals molecule can exist with a long bond. However, excited ArH* can form stable Rydberg molecules, also known as excimers. These Rydberg molecules can be considered as a protonated argon core, surrounded by an electron in one of many possible higher energy states.

Formation: Ar + ? -> Ar*;  Ar* + H₂ -> ArH* + H

Instead of dihydrogen, other hydrogen containing molecules can also have a hydrogen atom abstracted by excited argon, but note that some molecules bind hydrogen too strongly for the reaction to proceed. For example, acetylene will not form ArH this way.

In the van der Waals molecule of ArH, the bond length is calculated to be about 3.6 Å and the dissociation energy calculated to be 0.404 kJ/mol (33.8 cm^-1). The bond length in ArH* is calculated as 1.302 Å.

The spectrum of argon monohydride, both ArH* and ArD*, has been studied. The lowest bound state is termed A²?⁺ or 5s. Another low lying state is known as 4p, made up of C²?⁺ and B²? states. Each transition to or from higher level states corresponds to a band. Known bands are 3p -> 5s, 4p -> 5s, 5p -> 5s (band origin 17486.527 cm^-1), 6p -> 5s (band origin 21676.90 cm^-1) 3d? -> 4p, 3d? -> 4p (6900 cm^-1), 3d? -> 4p (8200-8800 cm^-1), 4d? -> 4p (15075 cm^-1), 6s -> 4p (7400-7950 cm^-1), 7s -> 4p (predicted at 13970 cm^-1, but obscured), 8s -> 4p (16750 cm^-1), 5d? -> 4p (16460 cm^-1), 5p -> 6s (band origin 3681.171 cm^-1), 4f -> 5s (20682.17 and 20640.90 cm^-1 band origin for ArD and ArH), 4f -> 3d? (7548.76 and 7626.58 ccm^-1), 4f -> 3d? (6038.47 and 6026.57 cm^-1), 4f -> 3d? (4351.44 cm^-1 for ArD). The transitions going to 5s, 3d? -> 5s and 5d? -> 5s, are strongly predissociated, blurring out the lines. In the UV spectrum a continuous band exists from 200 to 400 nm. This band is due to two different higher states: B²? -> A²?⁺ radiates over 210-450 nm, and E²? -> A²?⁺ is between 180 and 320 nm. A band in the near infrared from 760 to 780 nm.

Other ways to make ArH include a Penning-type discharge tube, or other electric discharges. Yet another way is to create a beam of ArH⁺ (argonium) ions and then neutralize them in laser-energized caesium vapour. By using a beam, the lifetimes of the different energy states can be observed, by measuring the profile of electromagnetic energy emitted at different wavelengths. The E²? state of ArH has a radiative lifetime of 40 ns. For ArD the lifetime is 61 ns. The B²? state has a lifetime of 16.6 ns in ArH and 17 ns in ArD.

src: slideplayer.com

Argon polyhydrides

The argon dihydrogen cation ArH+
2 has been predicted to exist and to be detectable in the interstellar medium. However it has not been detected as of 2016. ArH+
2 is predicted to be linear in the form Ar-H-H. The H-H distance is 0.94 Å. The dissociation barrier is only 2 kcal/mol (8 kJ/mol), and ArH+
2 readily loses a hydrogen atom to yield ArH⁺. The force constant of the ArH bond in this is 1.895 mdyne/Ų (1.895×10¹² Pa).

The argon trihydrogen cation ArH+
3 has been observed in the laboratory. ArH₂D⁺, ArHD+
2 and ArD+
3 have also been observed. The argon trihydrogen cation is planar in shape, with an argon atom off the vertex of a triangle of hydrogen atoms.

src: www.degruyter.com

Argoxonium

The argoxonium ion ArOH⁺ is predicted to be bent molecular geometry in the 1¹A? state. ³?^- is a triplet state 0.12 eV higher in energy, and ³A? is a triplet state 0.18 eV higher. The Ar-O bond is predicted to be 1.684 Å long and to have a force constant of 2.988 mdyne/Ų (2.988×10¹² Pa).

src: saylordotorg.github.io

ArNH⁺

ArNH⁺ is a possible ionic molecule to detect in the lab, and in space, as the atoms that compose it are common. ArNH⁺ is predicted to be more weakly bound than ArOH⁺, with a force constant in the Ar-N bond of 1.866 mdyne/Ų (1.866×10¹² Pa). The angle at the nitrogen atom is predicted to be 97.116°. The Ar-N lengths should be 1.836 Å and the N-H bond length would be 1.046 Å

src: 2012books.lardbucket.org

Argon dinitrogen cation

The argon dinitrogen linear cationic complex has also been detected in the lab:

Ar + N+
2 -> ArN+
2 photodissociation-> Ar⁺ + N₂.

The dissociation yields Ar⁺, as this is a higher-energy state. The binding energy is 1.19 eV. The molecule is linear. The distance between two nitrogen atoms is 1.1 Å. This distance is similar to that of neutral N₂ rather than that of N+
2 ion. The distance between one nitrogen and the argon atom is 2.2 Å. The vibrational band origin for the nitrogen bond in ArN+
2 (V = 0 -> 1) is at 2272.2564 cm^-1 compared with N₂⁺ at 2175 and N₂ at 2330 cm^-1.

In the process of photon decay, the dissociation of the molecule when hit by photons, it is three times more likely to yield Ar⁺ + N₂ compared to Ar + N+
2.

src: slideplayer.com

ArHN+
2

ArHN+
2 has been produced in a supersonic jet expansion of gas and detected by Fourier transform microwave spectroscopy. The molecule is linear, with the atoms in the order Ar-H-N-N. The Ar-H distance is 1.864 Å. There is a stronger bond between hydrogen and argon than in ArHCO⁺.

The molecule is made by the following reaction:

ArH⁺ + N₂ -> ArHN+
2.

src: images.slideplayer.com

Bis(dinitrogen) argon cation

The argon ion can bond two molecules of dinitrogen (N₂) to yield an ionic complex with a linear shape and structure N=N-+Ar-N=N. The N=N bond length is 1.1014 Å, and the nitrogen to argon bond length is 2.3602 Å. 1.7 eV of energy is required to break this apart to N₂ and ArN+
2. The band origin of an infrared band due to antisymmetric vibration of the N=N bonds is at 2288.7272 cm^-1. Compared to N₂ it is redshifted 41.99 cm^-1. The ground state rotational constant of the molecule is 0.034296 cm^-1.

Ar(N
2)+
2 is produced by a supersonic expansion of a 10:1 mixture of argon with nitrogen through a nozzle, which is impacted by an electron beam.

src: slideplayer.com

ArN₂O⁺

ArN₂O⁺ absorbs photons in four violet-ultraviolet wavelength bands leading to breakup of the molecule. The bands are 445-420, 415-390, 390-370, and 342 nm.

src: s3-us-west-2.amazonaws.com

ArHCO⁺

ArHCO⁺ has been produced in a supersonic-jet expansion of gas and detected by Fabry-Perot-type Fourier transform microwave spectroscopy.

The molecule is made by this reaction

ArH⁺ + CO -> ArHCO⁺.

src: www.frontiersin.org

Carbon dioxide-argon ion

ArCO+
2 can be excited to form ArCO+
2* where the positive charge is moved from the carbon dioxide part to the argon. This molecule may occur in the upper atmosphere. Experimentally the molecule is made from a low-pressure argon gas with 0.1% carbon dioxide, irradiated by a 150 V electron beam. Argon is ionized, and can transfer the charge to a carbon dioxide molecule. The dissociation energy of ArCO+
2 is 0.26 eV.

ArCO+
2 + CO₂ -> Ar + CO
2·CO+
2 (yields 0.435 eV.)

src: i.ytimg.com

van der Waals molecules

Neutral argon atoms bind very weakly to other neutral atoms or molecules to form van der Waals molecules. These can be made by expanding argon under high pressure mixed with the atoms of another element. The expansion happens through a tiny hole into a vacuum, and results in cooling to temperatures a few degrees above absolute zero. At higher temperatures the atoms will be too energetic to stay together by way of the weak London dispersion forces. The atoms that are to combine with argon can be produced by evaporation with a laser or alternatively by an electric discharge. The known molecules include AgAr, Ag₂Ar, NaAr, KAr, MgAr, CaAr, SrAr, ZnAr, CdAr, HgAr, SiAr, InAr, CAr, GeAr, SnAr, and BAr. SiAr was made from silicon atoms derived from Si(CH₃)₄.

In addition to the very weakly bound van der Waals molecules, electronically-excited molecules with the same formula exist. As a formula these can be written ArX*, with the "*" indicating an excited state. The atoms are much more strongly bound with a covalent bond. They can be modeled as an ArX⁺ surrounded by a higher energy shell with one electron. This outer electron can change energy by exchanging photons and so can fluoresce. The widely used argon fluoride laser makes use of the ArF* excimer to produce strong ultraviolet radiation at 192 nm. The argon chloride laser using ArCl* produces even shorter ultraviolet at 175 nm, but is too feeble for application. The argon chloride in this laser comes from argon and chlorine molecules.

Argon clusters

Cooled argon gas can form clusters of atoms. Diargon, also known as the argon dimer, has a binding energy of 0.012 eV, but the Ar₁₃ and Ar₁₉ clusters have a sublimation energy (per atom) of 0.06 eV. For liquid argon, which could be written as Ar_?, the energy increases to 0.08 eV. Clusters of up to several hundred argon atoms have been detected. These argon clusters are icosahedral in shape, consisting of shells of atoms arranged around a central atom. The structure changes for clusters with more than 800 atoms to resemble a tiny crystal with a face centered cubic (fcc) structure, as in solid argon. It is the surface energy that maintains an icosahedral shape, but for larger clusters internal pressure will attract the atoms into an fcc arrangement. Neutral argon clusters are transparent to visible light.

Diatomic van der Waals molecules

ArO* is also formed when dioxygen trapped in an argon matrix is subjected to vacuum ultraviolet. It can be detected by its luminescence:

O₂ + hv -> O+
2 + e^-;  O+
2 + e^- -> 2O*;  O* + Ar -> ArO*.

Light emitted by ArO* has two main bands, one at 2.215 eV, and a weaker one at 2.195 eV.

Argon sulfide, ArS* luminesces in the near infrared at 1.62 eV. ArS is made from UV irradiated OCS in an argon matrix. The excited states lasts for 7.4 and 3.5 ?s for spectrum peak and band respectively.

Triatomic van der Waals molecules

Cluster molecules containing dichlorine and more than one argon atom can be made by forcing a 95:5 mixture of helium and argon and a trace of chlorine though a nozzle. ArCl₂ exists in a T shape. Ar₂Cl₂ has a distorted tetrahedron shape, with the two argon atoms 4.1 Å from each other, and their axis 3.9 Å from the Cl₂. The van der Waals bond energy is 447 cm^-1. Ar₃Cl₂ also exists with a van der Waals bond energy of 776 cm^-1.

The linear Ar·Br₂ molecule has a continuous spectrum for bromine molecule X -> B transitions. The spectrum of bromine is blue-shifted and spread out when it binds an argon atom.

ArI₂ shows a spectrum that adds satellite bands to the higher vibrational bands of I₂. The ArI₂ molecule has two different isomers, one shape is linear, and the other is T shaped. The dynamics of ArI₂ is complex. Breakup occurs through different routes in the two isomers. The T shape undergoes intramolecular vibrational relaxation, whereas the linear one directly breaks apart. Diiodine clusters, I₂Ar_n have been made.

The ArClF cluster has a linear shape. The argon atom is closest to the chlorine atom.

Linear ArBrCl can also rearrange to ArClBr, or a T-shaped isomer.

Multiple argon atoms can "solvate" a water molecule forming a monolayer around the H₂O. Ar₁₂·H₂O is particularly stable, having an icosahedral shape. Molecules from Ar·H₂O to Ar₁₄·H₂O have been studied.

ArBH was produced from boron monohydride (BH) which in turn was created from diborane by way of an ultraviolet 193 nm laser. The BH-argon mixture was expanded through a 0.2 mm diameter nozzle into a vacuum. The gas mixture cools and Ar and BH combine to yield ArBH. A band spectrum that combines the A¹?<-X¹?⁺ electronic transition, with vibration and rotation can be observed. The BH has singlet spin, and this is the first known van der Waals complex with a singlet spin pair of atoms. For this molecule the rotational constant is 0.133 cm^-1, The dissociation energy is 92 cm^-1 and distance from argon to boron atom is 3.70 Å. ArAlH is also known to exist.

MgAr₂ is also known.

Polyatomic van der Waals molecules

Some linear polyatomic molecules can form T shaped van der Waals complexes with argon. These include NCCN, carbon dioxide, nitrous oxide, acetylene, carbon oxysulfide, and ClCN. Others attach the argon atom at one end to continue to be linear, including HCN.

Other polyatomic van der Waals compounds of argon, include those of fluorobenzene, formyl radical (ArHCO), 7-azaindole, glyoxal, sodium chloride (ArNaCl), ArHCl, and cyclopentanone.

src: slideplayer.com

Aqueous argon

Argon dissolved in water causes the pH to rise to 8.0, apparently by reducing the number of oxygen atoms available to bind protons.

With ice, argon forms a clathrate hydrate. Up to 0.6 GPa, the clathrate has a cubic structure. Between 0.7 and 1.1 GPa the clathrate has a tetragonal structure. Between 1.1 and 6.0 GPa the structure is body centered orthorhombic. Over 6.1 GPa, the clathrate converts into solid argon and ice VII. At atmospheric pressure the clathrate is stable below 147 K. At 295 K the argon pressure from the clathrate is 108 MPa.

src: 2012books.lardbucket.org

Argon fluorohydride

Argon fluorohydride was an important discovery in the rejuvenation of the study of noble gas chemistry. HArF is stable in solid form at temperatures below 17 K. It is prepared by photolysis of hydrogen fluoride in a solid argon matrix. HArArF would have such a low barrier to decomposition that it will likely never be observed. However HBeArF is predicted to be more stable than HArF.

src: slideplayer.com

Uranium compounds

CUO in a solid argon matrix can bind one, or a few argon atoms to yield CUO·Ar, CUO·Ar₃ or CUO·Ar₄. CUO itself is made by evaporating uranium atoms into carbon monoxide. Uranium acts as a strong Lewis acid in CUO and forms bonds with energies of about 3.2 kcal/mol (13.4 kJ/mol) with argon. The argon acts as a Lewis base. Its electron density is inserted into an empty 6d orbital on the uranium atom. The spectrum of CUO is changed by argon so that the U-O stretch frequency changes from 872.2 to 804.3 cm^-1 and the U-C stretch frequency from 1047.3 to 852.5 cm^-1. The significant change in the spectrum occurs because the CUO is changed from a singlet state (in gas phase or solid neon) to a triplet state, with argon or noble gas complexing. The argon-uranium bond length is 3.16 Å. This is shorter than the sum of atomic radii of U and Ar of 3.25 Å, but considerably longer than a normal covalent bond to uranium. For example, U-Cl in UCl₆ is 2.49 Å. When xenon is included in the solid argon matrix up to a few percent, additional van der Waals molecules are formed: CUO·Ar₃Xe, CUO·Ar₂Xe₂, CUO·ArXe₃ and CUO·Xe₄. Similarly krypton can substitute for argon in CUO·Ar₃Kr, CUO·Ar₂Kr₂, CUO·ArKr₃ and CUO·Kr₄. The shape of these molecules is roughly octahedral, with a uranium centre and with the noble gas atoms around the equator.

UO+
2 can bind up to five noble gas atoms in a ring around a linear O=+U=O core. These molecules are produced when uranium metal is laser ablated into dioxygen. This produces UO, UO₂, UO₃, U⁺, and importantly UO+
2. UO+
2 is then condensed into a noble gas matrix, either a pure element or a mixture. Heavier noble gas atoms will tend to displace the lighter atoms. Ionic molecules produced this way include UO
2Ne
4Ar+
, UO
2Ne
3Ar+
2, UO
2Ne
2Ar+
3, UO
2NeAr+
4, UO
2Ar+
5, UO
2Ar
4Kr+
, UO
2Ar
3Kr+
2, UO
2Ar
2Kr+
3, UO
2ArKr+
4, UO
2Ar
4Xe+
, UO
2Ar
3Xe+
2, UO
2Ar
2Xe+
3, and UO
2ArXe+
4, which are identified by a shift in the U=O antisymmetric stretching frequency.

Neutral UO₂ condensed in solid argon is converted from one electronic state to another by the argon atom ligands. In argon the electron configuration is 5f²(??) whereas in neon it is 5f¹7s¹ (the state ³H_4g compared to ³?_2u). This is because the argon atoms have a larger antibonding interaction with the 7s¹ electron, forcing it into a different subshell. The argonated compound has a stretching frequency of 776 cm^-1 compared to 914.8 cm^-1 in neon. The argon uranium dioxide molecule is likely UO₂Ar₅.

src: www.frontiersin.org

Beryllium oxide

When beryllium atoms react with oxygen in a solid argon matrix (or beryllia is evaporated into the matrix) ArBeO will be formed, and is observable by its infrared spectrum. The beryllia molecule is strongly polarised, and the argon atom is attracted to the beryllium atom. The bond strength of Ar-Be is calculated to be 6.7 kcal/mol (28 kJ/mol). The Ar-Be bond length is predicted to be 2.042 Å.

Analogously, beryllium reacting with hydrogen sulfide and trapped in an argon matrix at 4 K forms ArBeS. It has a binding energy calculated to be 12.8 kcal/mol (54 kJ/mol).

ArBeO₂CO (beryllium carbonate) has been prepared (along with Ne, Kr and Xe adducts).

src: dmd.aspetjournals.org

Carbonyl compounds

Group 6 elements can form reactive pentacarbonyls that can react with argon. These were actually argon compounds discovered in 1975, and were known before the discovery of HArF, but are usually overlooked. Tungsten normally forms a hexacarbonyl, but when subject to ultraviolet radiation it breaks into a reactive pentacarbonyl. When this is condensed into a noble gas matrix the infrared and UV spectrum varies considerably depending on the noble gas used. This is because the noble gas present binds to the vacant position on the tungsten atom. Similar results also occur with molybdenum and chromium. Argon is only very weakly bound to tungsten in ArW(CO)₅. The Ar-W bondlength is predicted to be 2.852 Å. The same substance is produced for a brief time in supercritical argon at 21 °C. For ArCr(CO)₅ the band maximum is at 533 nm (compared to 624 nm in neon, and 518 nm in krypton). Forming 18-electron complexes, the shift in spectrum due to different matrices was much smaller, only around 5 nm. This clearly indicates the formation of a molecule using atoms from the matrix.

Other carbonyls and compexed carbonyls also have reports of bonding to argon. These include Ru(CO)₂(PMe₃)₂Ar, Ru(CO)₂(dmpe)₂Ar, ?⁶-C₆H₆Cr(CO)₂Ar. Evidence also exists for ArHMn(CO)₄, ArCH₃Mn(CO)₄, and fac-(?²-dfepe)Cr(CO)₃Ar.

Other noble gas complexes have been studied by photolysis of carbonyls dissolved in liquid rare gas, possibly under pressure. These Kr or Xe complexes decay on the time scale of seconds, but argon does not seem to have been studied this way. The advantage of liquid noble gases is that the medium is completely transparent to infrared radiation, which is needed to study the bond vibration in the solute.

Attempts have been made to study cabonyl-argon adducts in the gas phase, but the interaction appears to be too weak to observe a spectrum. In the gas form, the absorption lines are broadened into bands because of rotation that happens freely in a gas. The argon adducts in liquids or gases are unstable as the molecules easily react with the other photolysis products, or dimerize, eliminating argon.

Coinage metal monohalides

The argon coinage metal monohalides were the first noble gas metal halides discovered, when the metal monohalide molecules were put through an argon jet. There were first found in Vancouver in 2000. ArMX with M = Cu, Ag or Au and X = F, Cl or Br have been prepared. The molecules are linear. In ArAuCl the Ar-Au bond is 2.47 Å, the stretching frequency is 198 cm^-1 and the dissociation energy is 47 kJ/mol. ArAgBr also has been made. ArAgF has a dissociation energy of 21 kJ/mol. The Ar-Ag bond-length in these molecules is 2.6 Å. ArAgCl is isoelectronic with AgCl-
2 which is better known. The Ar-Cu bond length in these molecules is 2.25 Å.

Transition metal oxides

In a solid argon matrix VO₂ forms VO₂Ar₂, and VO₄ forms VO₄·Ar with binding energy calculated to be 12.8 and 5.0 kcal/mol (53 and 21 kJ/mol). Scandium in the form of ScO⁺ coordinates five argon atoms to yield ScOAr+
5. these argon atoms can be substituted by numbers of krypton or xenon atoms to yield even more mixed noble gas molecules. With yttrium, YO⁺ bonds six argon atoms, and these too can be substituted by varying numbers of krypton or xenon atoms.

In the case of transition metal monoxides, ScO, TiO and VO do not form a molecule with one argon atom. However CrO, MnO, FeO, CoO and NiO can each coordinate one argon atom in a solid argon matrix. The metal monoxide molecules can be produced by laser ablation of the metal trioxide, followed by condensation on solid argon. ArCrO absorbs at 846.3 cm^-1, ArMnO at 833.1, ArFeO at 872.8, ArCoO at 846.2, Ar⁵⁸NiO at 825.7 and Ar⁶⁰NiO at 822.8 cm^-1. All these molecules are linear.

There are also claims of argon forming coordination molecules in NbO₂Ar₂, NbO₄Ar, TaO₄Ar, VO₂Ar₂, VO₄Ar, Rh(?²-O₂)Ar₂, Rh(?²-O₂)₂Ar₂, Rh(?²-O₂)₂(?¹-OO)Ar.

Other transition metal compounds

ArNiN₂ binds argon with 11.52 kcal/mol. The bending frequency of ArN₂ is changed from 310.7 to 358.7 cm^-1 when argon attaches to the nickel atom.

Other ions

Some other binary ions observed that contain argon include BaAr²⁺ and BaAr2+
2, VAr⁺, CrAr⁺, FeAr⁺, CoAr⁺, and NiAr⁺.

Gold and silver cluster ions can bind argon. Known ions are Au
3Ar+
, Au
3Ar+
2, Au
3Ar+
3, Au
2AgAr+
3 and AuAg
2Ar+
3. These have a triangular shaped metallic core with argon bound at the vertexes.

ArF⁺ is also known to be formed in the reaction

F+
2 + Ar -> ArF⁺ + F

and also

Ar⁺ + F₂ -> ArF⁺ + F.

and also

SF2+
4 + Ar -> ArF⁺ + SF+
3.

The ions can be produced by ultraviolet light at 79.1 nm or less. The ionisation energy of fluorine is higher than that of argon, so breakup occurs thus:

ArF⁺ -> Ar⁺ + F.

The millimeter wave spectrum of ArF⁺ between 119.0232 and 505.3155 GHz has been measured to calculate molecular constants B₀ = 14.8788204 GHz, D₀ = 28.718 kHz. There is a possibility that a solid salt of ArF⁺ could be prepared with SbF-
6 or AuF-
6 anions.

Excited or ionized argon atoms can react with molecular iodine gas to yield ArI⁺ Argon plasma is used as an ionisation source and carrier gas in inductively coupled plasma mass spectrometry. This plasma reacts with samples to produce monatomic ions, but also forms argon oxide (ArO⁺), and argon nitride (ArN⁺) cations, which can cause isobaric interference with detection and measurement of iron-56 (⁵⁶Fe) and iron-54 (⁵⁴Fe), respectively, in mass spectrometry. Platinum present in stainless steel can form platinum argide (PtAr⁺) which interferes with the detection of Uranium-234 which can be used as a tracer in aquifers. Argon chloride cations can interfere with the detection of arsenic as Ar³⁵Cl⁺ has a mass-to-charge ratio almost identical to that of arsenic's one stable isotope, ⁷⁵As. In these circumstances ArO⁺ may be removed by reaction with NH₃. Alternatively electrothermal vaporization or using helium gas can avoid these interference problems. Argon can also form an anion with chlorine, ArCl^-, though this is not a problem for mass spectrometry applications as only cations are detected.

The argon borynium ion, BAr⁺ is produced when BBr⁺ at energies between 9 and 11 eV reacts with argon atoms. 90% of the positive charge is on the argon atom.

ArC⁺ ions can be formed when argon ions impact carbon monoxide with energies between 21 and 60 eV. However more C⁺ ions are formed, and when the energy is on the high side, O⁺ is higher.

ArN⁺ can form when argon ions impact dinitrogen with energies between 8.2 and 41.2 eV and peaking around 35 eV. However far more N+
2 and N⁺ are produced.

ArXe⁺ is held together with a strength of 1445 cm^-1 when it is in the X electronic state, but 1013 cm^-1 when it is in the B excited state.

Metal-argon cations are called "argides". The argide ions produced during mass spectroscopy have higher intensity when the binding energy of the ion is higher. Transition elements have higher binding and ion flux intensity compared to main group elements. Argides can be formed in the plasma by excited argon atoms reacting with another element atom, or by an argon atom binding with another ion:

Ar⁺ + M -> ArM⁺ + e^-; M⁺ + Ar -> ArM⁺.

Doubly charged cations, called superelectrophiles, are capable of reacting with argon. Ions produced include ArCF2+
2 ArCH+
2, ArBF+
2 and ArBF2+
containing bonds between argon and carbon or boron.

Doubly ionised acetylene HCCH²⁺ reacts inefficiently with argon to yield HCCAr²⁺. This product competes with the formation of Ar⁺ and argonium.

The SiF2+
3 ion reacts with argon to yield ArSiF2+
2.

Polyatomic cations

Metal ions can also form with more than one argon atom, in a kind of argon metal cluster. Different sized metal ions at the centre of a cluster can fit different geometries of argons atoms around the ion. Argides with multiple argon atoms have been detected in mass spectrometry. These can have variable numbers of argon attached, but there are magic numbers, where the complex more commonly has a particular number, either four or six argon atoms. These can be studied by time of flight mass spectrometer analysis and by the photodissociation spectrum. Other study methods include Coulomb explosion analysis. Argon-tagging is a technique whereby argon atoms are weakly bound to a molecule under study. It results in a much lower temperature of the tagged molecules, with sharper infra-red absorption lines. The argon-tagged molecules can be disrupted by photons of a particular wavelength.

Lithium ions add argon atoms to form clusters with more than a hundred argon atoms. The clusters Li⁺Ar₄, and Li⁺Ar₄ are particularly stable and common. Calculations show that the small clusters are all quite symmetrical. Li⁺Ar₂ is linear, Li⁺Ar₃ is flat and triangular shaped with D_3h symmetry, Li⁺Ar₄ is tetrahedral, Li⁺Ar₅ could be a square pyramid or trigonal bipyramid shape. Li⁺Ar₆ is an octahedron shape with Li at the centre. Li⁺Ar₇ or slightly larger clusters have a core octahedron of argon atoms with one or more triangular faces capped by other argon atoms. The bonding is much weaker, which explains their greater scarcity.

Sodium forms clusters with argon atoms with peaks at numbers of 8, 10, 16, 20, 23, 25 and 29, and also at the icosahedral numbers of 47, 50, 57, 60, 63, 77, 80, 116 and 147 argon atoms. This includes the square antiprism (8) and the capped square antiprism (10 atoms). In Ti⁺Ar_1-n the argon atoms induce a mixing of the ground electronic state of 3d²4s¹ with 3d³4s⁰. When a plasma of titanium in expanding argon gas is made via a laser, clusters from Ti⁺Ar up to Ti⁺Ar₅₀ are formed. But Ti⁺Ar₆ is much more common than all the others. In this the six argon atoms are arranged in an octahedron shape around the central titanium ion. For Ti⁺Ar₂ DFT calculations predict it is linear, Ti⁺Ar₃ is not even flat, and has one short and two longer Ti-Ar bonds. Ti⁺Ar₄ is a distorted tetrahedron, with one longer Ti-Ar bond. Ti⁺Ar₅ is an asymmetrical trigonal bipyramid shape with one bond shorter. For clusters with seven or more argon atoms, the structure contains a Ti⁺Ar₆ octahedton with triangular faces caped by more argon atoms.

Cu⁺Ar₂ is predicted to be linear. Cu⁺Ar₃ is predicted to be planar T shaped with an Ar-Cu-Ar angle of 93°. Cu⁺Ar₄ is predicted to be rhombic planar (not square or tetrahedral). For alkali and alkaline earth metals the M⁺Ar₄ cluster is tetrahedral. Cu⁺Ar₅ is predicted to have a rhombic pyramid shape. Cu⁺Ar₆ has a flattened octahedral shape. Cu⁺Ar₇ is much less stable, and the seventh argon atom is outside an inner shell of six argon atoms. This is called capped octahedral. A complete second shell of argon atoms yields Cu⁺Ar₃₄. Above this number a structural change takes place with an icosahedral arrangement with Cu⁺Ar₅₅ and Cu⁺Ar₁₄₆ having more stability.

With a strontium ion Sr⁺ from two to eight argon atoms can form clusters. Sr⁺Ar₂ has a triangle shape with C_2v symmetry. Sr⁺Ar₃ has a trigonal pyramid shape with C_3v symmetry. Sr⁺Ar₄ has two trigonal pyramids sharing a face and strontium at the common apex. It has a C_2v symmetry. Sr⁺Ar₆ has a pentagonal pyramid of argon atoms with the strontium atom below the base.

Niobium tetraargide, Nb⁺Ar₄ probably has the argon atoms arranged in a square around the niobium. Similarly for vanadium tetraargide, V⁺Ar₄. The hexaargides, Co⁺Ar₆ and Rh⁺Ar₆ likely have octahedral argon arrangement. Indium monocation forms clusters with multiple argon, with magic numbers at 12, 18, 22, 25, 28, 45 and 54, and 70 argon atoms, which are numbers for icosahedral shapes.

By zapping copper metal with a UV laser in an argon-carbon monoxide mixture, argon tagged copper carbonyl cations are formed. These ions can be studied by observing which wavelengths of infrared radiation cause the molecules to break up. These molecular ions include CuCO⁺Ar, Cu(CO)₂⁺Ar, Cu(CO)₃⁺Ar, Cu(CO)₄⁺Ar which are respectively disrupted to lose argon, by infrared wavenumbers 2216, 2221, 2205 and 2194 cm^-1 respectively. The argon binding energy is respectively 16.3, 1.01, 0.97 and 0.23 kcal/mol. The infrared absorption peak for Cu(CO)₃⁺Ar is 2205 cm^-1 compared to 2199 cm^-1 for Cu(CO)₃⁺. For Cu(CO)₄⁺Ar the peak is at 2198 cm^-1 compared to 2193 for Cu(CO)₄⁺. For Cu(CO)₂⁺Ar the peak is at 2221 cm^-1 compared to 2218.3 for argon free, and for CuCO⁺Ar the peak is at 2216 cm^-1 considerably different to 2240.6 cm^-1 for CuCO⁺. Computationally predicted shapes for these molecular ions are linear for CuCO⁺Ar, slightly bent T shaped for Cu(CO)₂⁺Ar and a trigonal pyramid with argon at the top and a flat star like copper tricarbonyl forming the base.

Ions studied by argon tagging include the hydrated proton H⁺(H₂O)_nAr with n=2 to 5, hydrated 18-crown-6 ether alkali metal ions, hydrated alkali metal ions, transition metal acetylene complexes, protonated ethylene, and IrO₄⁺.

Argon methyl cations, (or methyliumargon) Ar_xCH₃⁺ are known for n=1 to 8. CH₃⁺ is a Y shape, and when argon atoms are added they go above and below the plane of the Y. If more argon atoms are added they line up with the hydrogen atoms. ?H⁰ for ArCH₃⁺ is 11 kcal/mol, and for Ar₂CH₃⁺ it is 13.5 kcal/mol (for 2Ar + CH₃⁺).

Dications

Dications with argon are known for the coinage metals. Known dications include CuAr_n²⁺ and AgAr_n²⁺ for n=1-8, with a peak occurrence of CuAr₄²⁺, or AgAr₄²⁺, and AuAr_n²⁺ n=3-7. In addition to the four argon atoms, the six argon atoms clusters have enhanced concentration. The stability of the ions with two positive charges is unexpected as the ionization energy of argon is lower than the second ionization energy of the metal atom. So the positive second charge on the metal atom should move to the argon, ionizing it, and then forming a highly repulsive molecule that undergoes a Coulomb explosion. However these molecules appear to be kinetically stable, and to transfer the charge to an argon atom, they have to pass through a higher energy state. The clusters with four argon atoms are expected to be square planar, and those with six, to be octahedral distorted by the Jan-Teller effect.

Solid compounds

Armand Gautier noticed that rock contained argon (and also nitrogen) that was liberated when the rock was dissolved in acid however how the argon was combined in rock was ignored by the scientific community.

Solid buckminsterfullerene has small spaces between the C₆₀ balls. Under 200 MPa pressure and 200 °C heat for 12 hours, argon can be intercalated into the solid to form crystalline Ar₁C₆₀. Once this cools down it is stable at standard conditions for months. Argon atoms occupy octahedral interstitial sites. The crystalline lattice size is almost unchanged at room temperature, but is slightly larger than pure C₆₀ below 265 K. However argon does stop the buckyballs spinning below 250 K, a lower temperature than in pure C₆₀.

Solid C₇₀ fullerene will also absorb argon under pressure of 200 MPa and at a temperature of 200 °C. C₇₀·Ar has argon in octahdedral sites and has the rock salt structure, with cubic crystals in which the lattice parameter is 15.001 Å. This compares to the pure C₇₀ lattice parameter of 16.964 Å, so the argon forces the crystals to expand slightly. The C₇₀ ellipsoidal balls rotate freely in the solid, they are not locked into position by extra argon atoms filling the holes. Argon gradually escapes over a couple of days when the solid is stored at standard conditions, so that C₇₀·Ar is less stable than C₆₀·Ar. This is likely to be due to the shape and internal rotation allowing channels through which Ar atoms can move.

When fullerenes are dissolved and crystallized from toluene, solids may form with toluene included as part of the crystal. However, if this crystallization is performed under a high pressure argon atmosphere, toluene is not included, being replaced by argon. The argon is then removed from the resultant crystal by heating.

Argon forms a clathrate with hydroquinone (HOC₆H₄OH)₃oAr. When crystallised from benzene under a pressure of 20 atmospheres of argon, a well defined structure containing argon results. An argon-phenol clathrate 4C₆H₅OHoAr is also known. It has a binding energy of 40 kJ/mol. Other substituted phenols can also crystalise with argon. The argon water clathrate is described in the Aqueous argon section.

Argon difluoride, ArF₂, is predicted to be stable at pressures over 57 GPa. It should be an electrical insulator.

At around 4 K there are two phases where neon and argon are mixed as a solid: Ne₂Ar and Ar₂Ne. With Kr, solid argon forms a disorganized mixture.

Under high pressure stoichiometric solids are formed with hydrogen and oxygen: Ar(H₂)₂ and Ar(O₂)₃.

Ar(H₂)₂ crystallises in the hexagonal C14 MgZn₂ Laves phase. It is stable to at least 200 GPa, but is predicted to change at 250 GPa to an AlB₂ structure. At even higher pressures the hydrogen molecules should break up followed by metallization.

Oxygen and argon under pressure at room temperature form several different alloys with different crystal structures. Argon atoms and oxygen molecules are similar in size, so that a greater range of miscibility occurs compared to other gas mixtures. Solid argon can dissolve up to 5% oxygen without changing structure. Below 50% oxygen a hexagonal close packed phase exists. This is stable from about 3GPa to 8.5 GPa. Typical formula is ArO. With more oxygen between 5.5 and 7 GPa, a cubic Pm3n structure exists, but under higher pressure it changes to a I-42d space group form. With more than 8.5 GPa these alloys separate to solid argon and ?-oxygen. The cubic structure has a unit cell edge of 5.7828 Å at 6.9 GPa. The representative formula is Ar(O₂)₃.

Using density-functional theory ArHe₂ is predicted to exist with the MgCu₂ Laves phase structure at high pressures below 13.8 GPa. Above 13.8 GPa it transforms to AlB₂ structure.

References

External links

• "Rotationally Resolved Infrared Spectrum of the Charge Transfer Complex [Ar-N₂]⁺ Supporting Online Material Observed frequencies and observed-calculated values of rotational transitions in the ²?⁺ ground state of [ArN₂]⁺ upon excitation of the NN stretching fundamental" (PDF). 
• Nonose, Naoko S.; Matsuda, Naoki; Fudagawa, Noriko; Kubota, Masaaki (1994). "Some characteristics of polyatomic ion spectra in inductively coupled plasma mass spectrometry". Spectrochimica Acta Part B: Atomic Spectroscopy. 49 (10): 955. Bibcode:1994AcSpe..49..955N. doi:10.1016/0584-8547(94)80084-7. 
• Jiménez Redondo, Miguel; Cueto, Maite; Doménech, José Luis; Tanarro, Isabel; Herrero, Víctor J. (2014). "Ion kinetics in Ar/H₂ cold plasmas: The relevance of ArH⁺". RSC Adv. 4 (107): 62030-62041. doi:10.1039/C4RA13102A. PMC 4685740 . PMID 26702354. 

Source of the article : Wikipedia